Important Notice; Installation - universalblue UBLA2800-21 Manual De Instrucciones

IMPORTANT NOTICE:

Application and product specifications are subject to change
without notice to improve product quality.
The application and product specifications may vary with those of
the related energy efficiency test or related safety test, etc.
Note: the first use may drain some water. If residual water comes
out after the performance test, it belongs to natural phenomenon.
After each use, unplug and close the faucet to avoid accidental
flooding or fire.

3. INSTALLATION

Make sure that the temperature of the places where the washing
machine is installed is above 0°C or place it outside.
Install the
management standards. Keep the base of the washing machine
constantly ventilated.
Keep the environment where the washing machine is installed
clean. Damage caused by cockroaches or other pests is not covered
under warranty.
Transportation bolt
The washers are installed with a transport bolt to prevent internal
damage during transportation.
Dismantle the transport bolt
To avoid internal damage during transportation, four bolts
are installed.
disassemble the bolt (see chart 1). If the bolts are not
washing machine
Before
correctly,
using the
according to
washing machine,
the
69