universalblue UBLA2800-21 Manual De Instrucciones página 92

 You can adjust the speed by pressing the "Speed" button.
4. Press the Start/Pause button and start washing.
 Start draining the water and centrifuge
5. When the program is finished, a warning sound will be heard.
If you want to change the current settings during the washing
-
process, first press the "Start/Pause" button and stop the
wash, change the settings as needed and then press the
same button again to restart the wash
- During the process, the actual spin speed may not match the
program speed, which is because the washing machine
adjusts the speed according to the amount of laundry.
- There may be a rhythmic buzzing sound during spinning,
which is normal.
Program: Tub clean
1. Preparations:
 Make sure there is nothing in the drum before cleaning.
 Open the drawer and add the liquid bleach in the main
compartment.
 Do not add detergent to prevent excessive foam.
 Close the drawer.
 Check the inlet pipes and make sure the water flow is open.
2. Press the On/Off button.
3. Rotate the program button to select the "Tub cleaning" program.
4. Press the Start/Pause button.
 The programs start running after the door is locked.
5. When the program is finished, a warning sound will be heard.
- When the program is finished, dry the inside of the washing
machine to prevent the door from deforming.
If there are children in the house, do not open the door for too
-
long.
.
92