universalblue UBLA2800-21 Manual De Instrucciones página 72

If your washing machine emits smoke or an unusual odor, cut the
power and contact professional maintenance staff.
Washing machines must have a water inlet.
To ensure proper operation, water injection tests are performed
before the washing machine leaves the factory, so there may be
water inside the drum.
Water inlet connection
The water supply pressure should
be between 30kPa and 1OOOkPa.
Do not force the thread when
connecting the inlet pipes to the
valves.
 Two seals are supplied in the
connectors of both ends of the
pipe to prevent water leaking.
 Open the tap and check if the
connectors leak.
 Check the pipes regularly and
replace them if necessary.
 Make sure that the pipes are not damaged or entangled with
each other.
The connection of inlet pipes and taps
1. Check the rubber seals on both sides of the hose. Insert a
72