EHEIM PLAY 2500 Manual De Instrucciones página 15

English
4. Commissioning
1. Screw the water distributor ③ onto the pump (
2. Screw the telescopic pipe ② onto the water distributor.
3. Push the required water feature nozzle (
Connecting the hose
1. Use a saw to shorten the outlet spigot to the diameter of your hose (
2. Screw the outlet spigot onto the water distributor (
3. Connect your hose to the outlet spigot.
‧ The hose connection is only required if the pump should additionally supply a filter or stream.
‧ We recommend fastening the hose with a hose clamp
5. Operation
1. Place the pump on a solid surface as horizontal as possible in the pond so that the filter housing is
covered by at least 20 cm of water. Pay attention to the maximum pond depth (see Technical data).
2. Pull the telescopic pipe ① out to the required length (
3. Align the telescopic pipe vertically with the ball joint ③.
4. BUBBLE water feature nozzle: Pull the insert ② out of the nozzle until the water feature has the
required shape.
5. Insert the mains plug in the mains socket.
1. Regulate the amount of water for the water feature(
2. Regulate the amount of water for the hose connection with rotary tap 2 ②.
1. Remove the mains plug from the mains socket.
6. Maintenance
▶ Before all maintenance work, remove the mains plug.
▶ Do not use hard objects or aggressive cleaning agents for cleaning.
The following sections describe maintenance work necessary for optimum and fault-free operation.
Regular maintenance prolongs the service life and secures functionality of the pump over a long
period.
All manuals and user guides at all-guides.com
) onto the telescopic pipe.
15
).
).
).
).
) with rotary tap 1 ①.