EHEIM PLAY 2500 Manual De Instrucciones página 17

English
7. Clearing faults
▶ Before clearing faults, remove the mains plug.
Faults
Pump does not start
Pump does not pump
Pump not pumping
For other faults, please contact EHEIM Service.
8. Decommissioning
1. Take the appliance out of the pond.
2. Clean the appliance
3. Store the appliance in a frost-proof place.
Store the appliance in a water-filled container to avoid starting difficulties in the spring. The mains plug
must not be submerged.
Disposal
When disposing of the appliance, heed the respective statutory regulations.
Information on the disposal of electrical and electronic appliances in the European Union:
Within the European Union, disposal of electrically operated appliances is governed by national reg-
ulations that are based on the EU Directive 2012/19/EU on waste electrical and electronic equipment
(WEEE). The appliance may no longer be disposed of with the municipal or household waste. The
appliance will be accepted free of charge at municipal collection points or recycling centres. The prod-
uct packaging is made up of recyclable materials. Dispose of them in an environmentally responsible
manner and take them for recycling.
All manuals and user guides at all-guides.com
Possible cause
No mains voltage
Mains plug is not inserted
Impeller is blocked
Thermal cut-out has activated
(except PLAY1000)
Filter housing is soiled
17
Remedy
▶ Check the mains voltage
▶ Check the supply line
▶ Insert the mains plug in the mains
socket
▶ Clean the pump
1. Remove the mains plug and let
the pump cool down.
2. Insert the mains plug again after
approx. 2 minutes.
▶ Clean the filter housing