Attaching The Wheels; Parking Brake Operation - Burley BARK RANGER Manual De Instrucciones Y Seguridad

Attaching the Wheels

1. Push in the rubber button on the outside of the wheel hub (Figure 11).
2. Insert wheel axle into axle receiver, and then release the button (Figure 12).
Pull firmly on wheel to confirm the axle is fully engaged.

Parking Brake Operation

1. Ensure the trailer is at a complete stop.
2. Rotate the red parking brake lever so that it points towards the front of the
trailer (Figure 13). The trailer may need to rotate forward slightly for the brake
to engage, and the lever to fully rotate.
3. The trailer may need to rotate forward slightly for the brake to engage,
and the lever to fully rotate. To disengage the parking brake, fully rotate
the lever so that it points towards the rear of the trailer.
WARNING
The parking brake is only intended to be used when the trailer is at
a complete stop. Use of the parking brake while in motion can result
in damage, an accident, serious injury, or death.
OWNER'S INSTRUCTION & SAFETY MANUAL
Figure 11
Figure 13
BURLEY.COM
Figure 12
ENG 7