Warnings; Keypad Lock; Warning; Setting The Maximum Limit Of Power - baraldi TRIO Serie Manual De Instrucciones

USE

•
If the "
of the electronic components (if this is repeated after cooling, please
contact the Technical Assistance Service).
•
If the "
overheated (e.g. due to the presence of an empty pan or metal objects).
•
If the letter "
number or another letter, this means there is a fault (please contact the
Technical Assistance Service).
2.5 Keypad lock
The keypad lock can be activated both with the cooking areas on or when the
hob is off, touching the "
ced above the symbol stays on.
With the cooking areas on, the controls active are "
the hob is off, the only control active is "
" " symbol again for about 2 seconds.
2.6

Warning

If one or more controls in an incorrect sequence are pressed for more than
ten seconds, the hob goes into error mode, the cooking areas are switched off
automatically and a buzzer sounds, being repeated about every 10 seconds.
When the cause of the error is removed (for example dirt or an object on the
controls area) the buzzer is deactivated and the hob can be used again.
2.7 Setting the maximum limit of power
The maximum power of the hob can be set at different levels: 7200W, 6000W,
3500W or 2800W. The factory setting is 7200W; if it is reduced, the hob limits
the setting of the hot plates or when they are switched on to the maximum po-
wer set. If this limit is exceeded, the "
" symbol appears, it means there is an anomalous overheating
" symbol appears, this means that the individual heating area is
" appears on one or more displays alternating with a
" symbol for about 2 seconds. A luminous dot pla-
INSTRUCTIONS FOR USE
" and "
". To deactivate the lock, touch the
" symbol appears.
", whilst when
21 / GB