Maintenance; Maintenance And Cleaning - baraldi TRIO Serie Manual De Instrucciones

MAINTENANCE

INSTRUCTIONS FOR USE
3.1

Maintenance and cleaning

Before each operation, disconnect the appliance from the mains.
After each use, when cool, clean the hob eliminating even the small residues
which, when the hob is switched on again, can become impossible to remove.
Only use suitable products, avoiding steel wool pads, abrasive sponges and
powder detergents as these products can scratch the surface of the glass.
Sprays to clean ovens are not suitable as they are aggressive and damaging for
the surface of the glass.
Slight residue can be removed with a damp cloth or with hot soapy water.
Ring marks from soap can be removed with water which must be dried using
a soft cloth.
Marks of scale, caused by boiling liquids overflowing from the containers, are
removed with vinegar, lemon or an anti-scale product.
Eliminate residues of detergent as, the next time they heat up, they could
become aggressive for the glass.
For resistant and hardened incrustations we recommend using a scrape for win-
dows with a metallic blade which can easily be found on the market (see figure).
Do not use jets of steam for cleaning.
To remedy any anomalies of functioning, please contact qualified personnel.
23 / GB