Product description
Overview
1
Inlet 1 (suction side)
• Filter housing for pond bottom filtration for submerged installation.
2
Inlet 2 (suction side)
• Connection of the supply flow from a pond for dry installation.
• For dry installation, install the pump without a filter housing.
3
Outlet (pressure side)
• Connection of the return flow to the pond (e.g. via a water course).
4
Stepped hose adapter with ball joint for outlet.
5
Stepped hose adapter for inlet 2 (dry installation).
6
Hose clips for fastening hoses on the hose sleeves.
7
Power cable with power plug
Symbols on the unit
20
The unit is dust-proof and water-tight down to 4 m.
Possible hazard for persons wearing pace makers.
Protect the unit from direct sunlight.
Never dispose of the unit with normal household waste.
Read the operating instructions.
AMX0174