Countertop Installation - CORBERO CMICM9023DCB Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

COUNTERTOP INSTALLATION

Remove all packing material and accessories. Examine the oven for any
damage such as dents or broken door. Do not install if oven is damaged.
Cabinet: Remove any protective film found on the microwave oven
cabinet surface. Do not remove the light brown Mica cover that is
attached to the oven cavity to protect the magnetron.
INSTALLATION
1. Select a level surface that provide enough open space for
the intake and/or outlet vents.
20cm
min85cm
(1) The minimum installation height is 85cm.
(2) The rear surface of appliance shall be placed against a wall.
Leave a minimum clearance of 30cm above the oven. A
minimum clearance of 20cm is required between the oven
and any adjacent walls.
(3) Do not remove the legs from the bottom of the oven.
(4) Blocking the intake and/or outlet openings can damage the
oven.
(5) Place the oven as far away from radios and TV as possible.
Operation of microwave oven may cause interference to
your radio or TV reception.
2. Plug your oven into a standard household outlet. Be sure
the voltage and the frequency is the same as the voltage
and the frequency on the rating label.
WARNING:Do not install oven over a range cooktop or
other heat-producing appliance. If installed near or over a
heat source, the oven could be damaged and the warranty
would be void.
The accessible surface may be
30cm
0cm
20cm
hot during operation.
51

Publicidad

Tabla de contenido
loading

Tabla de contenido