Turning On/Off - Andis SBT-1 Manual De Instrucciones

1. Plug the charging adapter into the bottom of unit. The light on the trimmer will
turn ON and flash slowly.
2. For first time use, charge the product for at least 90 minutes. When the battery
is fully charged, the product can be used for 60 minutes. The light will stay
illuminated when fully charged.
3. When the batteries are fully charged, disconnect the charging adapter.
NOTE: For longer battery life, charge the batteries only when they have run
out completely.
4. Low battery warning: when the battery has less than 10% power, the charging
indicator light will begin flashing.
WET/DRY OPERATION
This trimmer is IPX5 certified for use with water. Trimmer can safely be used in the
shower and with water or shaving cream. Do not use shaving gels as they will clog
trimmer blades.

TURNING ON/OFF

1. To turn the trimmer ON, press the ON/OFF button.
2. To turn the trimmer OFF, press the ON/OFF button again.
TRAVEL LOCK FEATURE
This product is equipped with a travel lock feature. This feature prevents the unit from
turning on accidently when traveling or storing. Instead of the unit turning on with
a single push of the on/off button, travel lock requires the button to be pushed and
held for 3 seconds. To enable the travel lock, press and hold the power button for
3 seconds, the unit will turn off and the light on the base of the unit will blink
5 times. To release the travel lock, press and hold the power button for 3 seconds
again, the light will blink 5 times then the unit will turn on.
CHANGING ATTACHMENTS
1. Make sure the trimmer is turned OFF.
2. To take off attachment, grasp it with one hand, grasp the trimmer body with the
other hand and rotate counterclockwise until the arrows on the back of the unit and
head align. Lift attachment up to remove.
3. To install attachment, perform removal instructions in reverse.
4