2.2. Frame
2.2.1 Side frame
The side frames are designed to accommodate fixation of
the front and rear wheels. No adjustment is required on side
frames.
2.2.2 Folding system
It consists of two cross-bars which integrate the seat rails.
To fold and unfold your wheelchair, see chapter A " General "
paragraph 2.1. No adjustment is required on folding system.
2.3. Rear wheels
16
2.3.1 12" Wheels
The 12" (310 mm) rear wheels are composite wheels. They
are be delivered with solid tyre.
2.3.2 Axles
The wheelchair is commercialized with fixex axles.
2.4. Castors
The solid front wheels are available in 8" x 1 1/4" (200mm x
28 mm) diameter.
All manuals and user guides at all-guides.com
2.5. Brakes
2.5.1 Manual brakes
-Locking Hand Brake (photo 4)
1. Push down on the bottom portion of the brake handle (A)
until an audible click is heard.
2. Refer to Unlocking Hand Brake, see § following .
- Unlocking Hand Brake (photo 4)
1. Pull up on the top portion of the brake handle (A) to
release.
2. Release the brake handle.
- Using Hand Brake (photo 4)
1. Pull up on the top portion of the brake handles (A) toward
the push handles.
2. Do one of the following:
• Remain stationary - Hold the brake handle up.
• Continue mobility - Release the brake handle.
A
4