Publicidad
Idiomas disponibles
Idiomas disponibles
Warnings – Assembly text instructions – Maintenance
English
WARNINGS
General
•
Do not use any sharp tools to open the
packaging.
•
We strongly advise against using power tools.
•
Tripping hazard, mind your step.
•
Do not put out cigarettes on the table.
•
Not grafitti proof.
•
Do not leave children unattended whilst playing
on the table.
•
away from babies and children.
•
Colors can differ over years and from batch to
batch.
Product
•
Do not drag the table, but carry it with minimum
2 people.
•
Anchoring the product has to be done by
qualified people.
•
For anchoring: use suitable bolts or screws from
a specialized store depending on the material
your terrace is made of.
High-tech polyester
•
Shake or brush off loose dirt immediately.
•
Do not use any aggressive detergents as they will
remove the protective coating of the fabric.
•
We strongly advise you not to use a high-pressure
hose for cleaning.
Stainless steel
•
Very good UV colour fastness.
•
Flame retarding: NEN-EN13501-1 A1 - Class A1
products will not contribute to fire in any stage,
including fully developed fire. For this reason,
they are assumed to be capable of satisfying all
requirements of all lower classes as well.
•
Watch out, stainless steel isn't entirely rustproof!
Be sure to avoid contact with iron objects. If it
does show signs of rust, clean with rust remover
as quickly as possible.
ASSEMBLY INSTRUCTIONS
Shade & Market shade - p8
1. Remove one of the side plates by unscrewing the
four bolts and set everything aside.
2. Slide a supplied cylindrical pin into the two outer
16
slots in the top profile.
3. Now slide the shade stopper profiles into the
same slots. Make sure they are positioned
correctly.
4. Now slide another cylindrical pin into the same
slots.
5. Reattach the side plate with the four screws.
6. Now attach the three stainless steel tubes to the
top profile with four M6x10 screws + four M6
spring washers each.
7. Now hang the fabric on the AMAi by sliding it over
the three stainless steel tubes. Make sure the side
with the two black cords faces outwards.
8. Push the fabric all the way up to the top profile
and hook the first pole in the three hooks under
the tubes. Tip: When doing so, lift the shade
stopper profile slightly so that the pole can pass
through.
9. Use the black cords to open the shade. Clamp
the outer pole in the three black plastic hooks
on the outside of the stainless steel tubes to hold
the shade open. When closing the shade, make
sure the fabric goes all the way under the shade
stopper profile.
MAINTENANCE
High-tech polyester
CLEANING
When dirty
Clean the fabric of the parasol and the cover by
rinsing it with water and hand soap or Extremis multi
cleaner if necessary.
MACHINE WASHING
Rarely
It is also possible to put the parasol fabric in a
washing machine (60°). Tumble dry at low tempera-
ture. Do not iron.
Stainless steel
DAY TO DAY CLEANING
Regularly and after every use
Clean with lukewarm water and a mild detergent or
Extremis Multi Cleaner.
REGULAR CLEANING
When dirty
We advise regular cleaning with Inox Cleaner and
Protector.
Publicidad
