Cutting Width - STERWINS 25EGT1-300.1 Manual

ES 3. TECHNICAL DATA
PT
EN
Guaranteed sound power level (dB(A))
Measured sound power level (dB(A))
Max Vibration level (K=1.5m/s
The declared vibration total value has been measured in accordance with a standard test method and
may be used for comparing one tool with another. The declared vibration total value may also be used in
a preliminary exposure assessment. The vibration emission during actual use of the power tool can differ
from the declared total value depending on the ways in which the tool is used; and it may be necessary
to identify safety measures to protect the operator that are based on an estimation of exposure in the
actual conditions of use (taking into account all parts of the operating cycle such as the times when the
tool is switched off and when it is running idle in addition to the trigger time).
4. ASSEMBLY
Model
Power level
Voltage
Frequency

Cutting width

Line width
Machine weight
Working current
IP Degree
No load speed
Max Sound Pressure Level
WARNING! The product must be fully assembled before
operation! Do not use a product that is only partly assembled
or assembled with damaged parts !
25EGT1-300.1 25EGT1-300.1Z
L = 94.8 dB(A); K
WA
)
2 Rear handle: 5.0 m/s
L
PA
48
280 W
220-230V
50 Hz
25 cm
1.6 mm
1.8 Kg
96 dB(A)
=1.07 dB(A)
WA
1.1-2.3A
IP20
12000 min
-1
; Front handle: 4.1 m/s
2
= 86 dB(A); K = 3.0 dB(A)
PA
2