Publicidad
Idiomas disponibles
Idiomas disponibles
the other side of the fuse must
touch the metal test plate 1 (5).
If the LED lights up and the buzzer
sounds, the fuse is good.
• Testing a bulb
The method used to test a fuse is
the same as to test a bulb.
If the LED lights up and the buzzer
sounds, the bulb is good.
D/ Detection of electrostatic radiation
Set the selector switch to "II" (3).
Turn the sensitivity knob (2)
forwards as far as it will go.
Place the AC voltage detection
zone of the device (9) close to the
television screen /monitor.
The buzzer sounds and the LED
lights up when the device detects
the radiation. Move the device
away from the screen. The position
where the LED and the buzzer switch
off is the position where the radiation
is not severe.
E/ Torch function
Set the selector switch to OFF (3).
Press the pushbutton (8) to
switch on the LED light.
18
Publicidad
