Device Components and Controls (Page 2)
1. USB input (Type-C) for case charging
2. LED case charge indicators
3. Charging contacts
4. Headphone LED
5. Control buttons
6. Microphone
7. Removable ear cushions
8. Charging cable USB Type-C
First time use
Remove the protective film from the device.
Before the first use, charge the case and headphones via a USB
cable for at least 30 minutes. During this procedure, it is not recom-
mended to remove the headphones from the case.
Charging the Case
Connect the case with the headphones to a power source using
the USB cable (Type-C) supplied with the device.* LEDs on the case
will show the current charge level. When the full charge level is
reached, all 4 indicators on the case will be illuminated. Charging
time is approximately 1 hour 30 minutes.
* Power adapter not included. We recommend using a power
All manuals and user guides at all-guides.com
6
adapter with the following specifications: 5 V, max. 0.5 A.
WARNING: use only the original Elari charging cable supplied. Us-
ing non-original cables may damage the device and void the prod-
uct warranty.
Charging the Headphones
To charge the headphones, check the side label (left / right) on
each headphone and insert them into the appropriate compart-
ments of the charging case. This will start charging automatically.
During a charge cycle, the red indicator on the headphones lights
up, with the indicators on the case corresponding to its charge lev-
el*. When the full charge level is reached, the headphone indicator
will turn white for 1 minute and turn off.
* If, after you have placed the headphones in the case, there is no vis-
ible indication, you must connect the case to a power source for charg-
ing by using the USB cable (Type-C), which is included in the package.
The case will be charged simultaneously with the headphones.
Turning on and pairing the headphones
together
The headphones automatically turn on as soon as you remove
them from the charging case*. The white headphone indicator will
illuminate.
7