Important - Elari EDS-001 Guia De Inicio Rapido

*Make sure that case is charged. If case is fully discharged, please
turn on the headphones manually.
To turn on the headphones manually, press and hold the control
button on both headphones for 3 seconds.
After turning on the headphones automatically switch to pairing
mode you will hear "Pairing" notification in each of them. In pairing
mode, the white headphone indicator will flash.
If pairing the headphones does not occur for 10 seconds, the left
earpiece will pair with the Bluetooth device.
If synchronization is successful, you will hear an "EarDrops connect-
ed" audible notification in each of the headphones, after which the
headphones will pair with an external Bluetooth device.
IMPORTANT: for stereo sound, you should pair the headphones
with each other before connecting them via Bluetooth to an exter-
nal Bluetooth device (smartphone, tablet, laptop, etc.).
Connecting the Headphones to an External
Bluetooth Device
1. Turn on Bluetooth on your device.
2. Open the Bluetooth settings menu on your device and search
for available devices.
All manuals and user guides at all-guides.com
8
3. Select "Elari EarDrops" from the list of the Bluetooth devices
found.
Upon successful connection, you will hear a voice message "Ear-
Drops connected" in the left earpiece.
You can use each headphone as a sound source in mono mode,
connecting them to the signal source as "Elari EarDrops" together
or "Elari EarDrops-R" separately (without pairing them).
To manually switch the headphones into pairing mode with an exter-
nal Bluetooth device, first make sure that the headphones are turned
on, then press and hold the control button on the selected headset
for 5 seconds until you hear the voice message "Pairing" and see the
indicator lights alternately flash red and white. Follow steps 1-3.
The headphones will remain in pairing standby mode for 2 min-
utes, after which they will switch to normal mode.
Turning off the Headphones
To turn off the headphones, place them in the charging case or
press and hold the control button on any of the headphones for
3 seconds. The headphones will turn off, and you'll hear an audible
notification in each of the headphones.
9