Canon PIXMA MX700 Serie Guía De Configuración página 23

2-A Setting up for use over LAN
This section describes how to set up the machine to be used over wired LAN, when the machine has
not been connected to the network. This setup procedure requires settings to be performed on the
machine and the computer.
1
On the Canon IJ Network Tool screen,
select LAN connection, then click OK.
If the Canon IJ Network Tool does not start up
automatically, select Library > Printers > Canon >
BJPrinter > Utilities > Canon IJ Network Tool.
Note
If you select USB connection, the Canon IJ Network
Tool will exit without setting up the machine to be used
over LAN.
If the screen shown on the right appears, make
sure of the following and click OK.
– The machine is turned on.
– The machine is connected to the computer with a
USB cable.
– The MP Drivers have been installed.
2
Select Setup in the pop-up menu, select your
machine's name in Printers, then click OK.
Note
If no printer is detected, click OK. Make sure that
the machine is connected to the computer with a
USB cable and turned on, then click Update.
If the machine's network settings are already
configured, the Setup Environment Confirmation
dialog box appears asking for your confirmation to
use the machine with the current settings. You can
proceed with the setup using the current network
settings. To do so, click Use as is. To reconfigure
the network settings, click Reconfigure.
21