Parrot AR.Drone 2.0 Guía De Instalación Rápida página 20

IP address
• Check that the IP address appears on the AR.Drone 2.0 network. To do this:
- If you are using an iPhone, select
of the network "ardrone2".
- If you are using an Android phone, select
Settings
and select the network "ardrone2".
• An IP address starting with 192.168.1. should be displayed in
the IP field.
Connection problem
In case of problem during the connection process between the smartphone and the AR.Drone 2.0 :
- Check the color of the LED on the bottom side of the AR.Drone 2.0. If it is red or orange,
restart the AR.Drone 2.0. To do so, disconnect and reconnect the battery. Wait until the LED
turns green.
- On your smartphone, turn the Wi-Fi off and back on.
- For more information, refer to the support section of our website
Using the AR.Drone 2.0 with another smartphone
If you wish to use your AR.Drone 2.0 with another smartphone:
1. Launch the AR.FreeFlight 2 then touch
2. Disable the
20 English
Settings > Wi-Fi
Pairing option.
and then press the arrow
Settings > Wireless & Networking > Wi-Fi
www.parrot.com.
to the right