Parrot AR.Drone 2.0 Guía De Instalación Rápida página 22

Taking off
1. Install the battery into the battery box and connect it to the
AR.Drone 2.0.
2. Place the AR.Drone 2.0 in a clear, flat and dry area and
position yourself at least 1 meter behind it.
Note: The front of the AR.Drone 2.0 is easily identifiable
due to the camera located in the nose of the device.
3. Tap the
a. Make sure the AR.Drone 2.0 is on a flat area then tap the
b. Select the hull that is currently installed on the AR.Drone 2.0 (internal or external) and then
the type of flight (internal or external) that you wish to make.
4. Tap
> The engines start and the AR.Drone 2.0 stabilizes itself automatically at an altitude of 1 meter.
Flying the AR.Drone 2.0
22 English
button then:
.
• Slide the joystick to the top to move the AR.Drone 2.0 higher (diagram
1 p.8).
• Slide the joystick to the bottom to move the AR.Drone 2.0 lower
(diagram 2 p.8).
• Slide the joystick to the right to move the AR.Drone 2.0 to the right
(diagram 3 p.8).
• Slide the joystick to the left to move the AR.Drone 2.0 to the left
(diagram 4 p.8).
LITHIUM POLYMER BATTERY
1000mAh 11.1V
10C CONTINUOUS DISCHARGE
CHARGE AT 1A MAX Made in china
button.