Air Cleaner Service - Honda EG4000CX Manual De Explicaciones

MAINTENANCE

AIR CLEANER SERVICE

1.Remove the air cleaner cover taking care not to damage it.
(1)Unsnap the air cleaner cover clips and pull the air cleaner cover.
(2)Free the hooks from the setting pins.
(3)Remove to the right side of the frame pipe.
(4)Remove the air cleaner element from the air cleaner case and
clean it.
SETTING PIN
AIR CLEANER COVER
Wash the air cleaner element in a solution of household detergent and
warm water, then rinse thoroughly, or wash in nonflammable or high
flashpoint solvent. Allow the air cleaner element to dry thoroughly.
Soak the air cleaner element in clean engine oil and squeeze out the
excess oil. The engine will smoke during initial startup if too much oil is
left in the air cleaner element.
Clean
30
HOOK
FRAME PIPE
AIR CLEANER ELEMENT
Squeeze and Dry
Do not twist.
AIR CLEANER CASE
Dip in Oil
CLIP
Squeeze
Do not twist.