Installing The Pressure Regulator; Securing The Cooktop To The Countertop - Gaggenau CG280211CA Instrucciones De Instalación

Apply the included foam sealing tape around the edges
2.
of the underside of the appliance.
Attach the hold-down brackets to the underside of the
3.
cooktop with the provided short screws and washers.
Do not tighten the screws.
4.2 Installing the pressure regulator
WARNING
Do not attempt any adjustment of the pressure regulator,
except when converting to propane. Adjustments could
lead to leaks or cause incorrect gas pressure to the appli-
ance.
Identify the parts of the pressure regulator.
1.
a Appliance manifold connection
b Conversion nut
c Pressure regulator
Install the pressure regulator supplied with the cooktop
2.
to the appliance manifold connection. Apply Teflon®
tape on the threads of the manifold pipe.
Turn the pressure regulator to hand tighten plus ¼ turn,
3.
not exceeding 1 turn for alignment.
When the regulator is securely installed on the manifold
a
pipe, the conversion nut will be easily accessible.
4.
WARNING Make sure the used gas connection
line is not connected to the gas supply, before carrying
out the following steps.
Connect a ½" metal flex gas line or fixed metal pipe
connection to the pressure regulator. Always install a
new gas connection.
4.3 Securing the cooktop to the countertop
The cooktop must be secured from below using the hold-
down brackets provided.
WARNING
Before installing, turn power OFF at the service panel.
Lock service panel to prevent power from being turned
▶
ON accidentally.
Rotate the hold-down brackets so that the appliance
1.
can be placed in the cutout.
Installation procedure en-us
9