SOLAC AS3266 Instrucciones De Uso página 7

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
Retract the cable by pressing the roller cable
button and guide the cable into the appliance.
Clean the appliance.
CARRY HANDLE/S:
This appliance has a handle on the upper part
of the body, which facilitates comfortable trans-
portation
PARKING POSITION:
This appliance has its own parking position for
comfortable and straightforward storage.
To make use of the horizontal parking hook the
head's hook onto the hook that is to be found
on the lower part of the appliance (Fig.2).
CLEANING
Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an acid
or base pH such as bleach, or abrasive pro-
ducts, for cleaning the appliance.
Never submerge the appliance in water or any
other liquid or place it under running water.
EMPTYING THE DUST BOX
Empty the dust box when it is full (observation
facilitated by transparent windows), or when
vacuuming power is notably reduced.
Disconnect the hose from the vacuum clea-
ners air intake.
Disconnect the dust box from the appliance
(Fig.3).
Open the lid of the dust box and empty the
contents into the appropriate waste disposal
receptacle.
Check the condition of the motor filter.
Close the lid of the dust box.
Attach the dust box to the appliance.
Connect the hose to the vacuum cleaners air
intake.
CHANGING THE FILTERS:
Motor filter, it is advisable to be changed at
least once a year or every 50 hours of the
appliance's use.
Air outlet HEPA filter (high efficiency air filter
that efficiently retains spores, ash, sawdust,
pollen...), it is advisable to change it a least
once a year or after every 100 hours of use.
TO REMOVE THE FILTERS:
MOTOR FILTER:
Disconnect the dust box from the appliance
(Fig.3).
Open the cover that contains the filter. (Fig.4).
Remove the filter from its housing (Fig.5).
OUTLET FILTER:
Open the air outlet grille located on the rear
of the vacuum cleaner. To access the filter.
(Fig.6).
Remove the filter from its housing
To reassemble the filter, proceed with the abo-
ve instructions, in reverse order.
SUPPLIES
Supplies can be acquired from distributors
and authorised establishments (such as filters,
etc...) for your appliance model.
Always use original supplies, designed specifi-
cally for your appliance model.
These supplies are available in specialist
shops.
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido