Streaming Bt Audio - auna Connect Soundchef MKII Manual

EN
50

STREAMING BT AUDIO

Streaming using BT
You can use BT to stream any audio from your phone or tablet.
Pairing a mobile device
Before you can stream audio, you will need to pair your phone or tablet.
Note: BT pairing varies on different mobile devices. See your mobile device
manual for specific information.
To pair using BT:
1. Press the HOME button and turn and press the NAVIGATE dial to select
'BT' display. The BT input display and the BT icon will start to flash.
Note: If the BT icon is displayed, is already connected to another BT device.
See below for more information.
2. On your mobile device, select the option to add a new BT device. On
some mobile devices you may need to select the search or scan option.
3. Start the pairing process on your mobile device. Do this by selecting
'Connect Soundchef MKII' from the list of available devices that appear
on the mobile device's screen. Your mobile device will connect to
automatically once paired.
4. After selecting your favorite song, press PLAY/PAUSE button on the unit
to play or pause the song.
Disconnecting a mobile device
You can only have one mobile device connected to the unit via BT at a time.
If you want to stream audio from a different mobile device, you will need to
disconnect any mobile device that is currently connected to via BT first.
To disconnect a mobile device:
1. Press and hold the BT PAIR Button for 3 seconds or turn off the BT
function of device currently paired with Connect Soundchef MKII then
repeat step 3 above.
2. Turn and press the NAVIGATE dial to select 'Yes' to disconnect your
mobile device.
If your mobile device goes out of BT range (this is usually around 10 m
(30 ft)) the mobile device's BT connection is disconnected automatically.