Purpose; Description Of The Door - Novoferm NovoZip Manual De Uso

1. PURPOSE

This manual provides the technical characteristics and instructions for use necessary for the correct operation of
the industrial door, without fire resistance or smoke control features, taking into account the good maintenance of
the door and the safety of the operator.
This manual is designed for the usual user of the door and should be kept in the immediate vicinity of the door.
• Instruct users on how to operate the high-speed self-repairing door.
• Do not allow third parties to operate the door..
EN
Before operating the door for the first time, it is essential that you read and understand the instructions in this
manual.
This manual describes the use of a door installed and configured by qualified personnel.
The manufacturer does not accept any liability for damage and/or injury occurring as a result of the instructions
in the manual not being observed.
Modifications to the machine are only permitted by written agreement between the manufacturer and the client.
In other cases, the manufacturer's declaration will be voided.
ATTENTION: Incorrect and improper use of the door can cause serious damage to
persons and property.

2. DESCRIPTION OF THE DOOR

The high-speed self-repairing door NovoZip (EN 12433-1 Part 1: Types of doors) is designed, in accordance with
usual engineering practices, for industrial use without fire resistance or smoke control features. It is intended to
be installed in areas accessible to people and whose main objective is to provide secure access to goods and
vehicles accompanied by people in industrial premises.
The operation of the door is always motorized, and a system is installed to switch to manual mode in the event of
a breakdown or failure of the motor.
It is called self-repairing, because in the case of a vehicle hitting the canvas, if the canvas comes out of the guides,
it will automatically go into its operating position so that the door can operate normally without anyone having to
intervene in the next manoeuvre.
The following table and picture show the main components of the door.
No. ITEM
Right lateral frame
01
with plastic guide
Left lateral frame
02
with plastic guide
03 Pulley
04 Flag
05 Bearings
06 Motor
30
This user manual must be handed to the customer and must be kept in a safe place throughout the whole period of use!
No. ITEM
07 Canvas with side zippers
08 Control panel
09 Upper spacer
10 Brush
11 Photocell
12 Light curtain
No. ITEM
13 Motor support
14 Mounting bracket
15 Key
16 Roll cover
17 Motor cover
18 Right side cover