Prepare The Site - Kohler K-9025 Manual Del Usuario

1I (2.5cm) Plywood Subfloor
Adequate Plywood
Support

1. Prepare the Site

- Inspect the flooring at the installation site. Repair as necessary.
NOTE: The receptor weighs approximately 175 lbs. (79Kg). Provide adequate plywood support for the receptor.
- Make sure the sub and finished floors are flat and level.
2. Cut the Floor- Drop-in Installation Only
- If you have chosen a drop in installation, carefully measure dimensions B and C. Then subtract 1/2" (1.3cm) from
the C" dimension and 1/4" (6mm) from the B dimension to determine the size of the recessed hole.
- Measure dimension A to determine the depth of the recessed hole. The feet must rest on the subfloor, and the
receptor must be level.
Kohler Co.
B
3
C
A
A
1009404-2-