cecotec CONGA POPSTAR 7000 MATTRESS Manual De Instrucciones página 39

- UV penetration ability is weak. Any paper, glass and plastic will greatly reduce the intensity
of ultraviolet radiation. Therefore, dust and oil stains on the lamp tube will directly
affect its penetrating ability. UV lamps shall be cleaned regularly to avoid affecting UV
transmittance and intensity.
- Do not touch the UV lamp with your fingers, since stains can affect the penetration of UV
light.
- If the device is not going to be used for a long time, keep the machine in a cool and dry
place. Do not put it in direct sunlight or in humid environments.
Dust tank cleaning
1. Turn the device off and remove the power plug.
2. Place the machine in an upright position.
3. Press the dust tank release button.
4. Lift the dust tank assembly upwards.
5. Rotate the dust tank counterclockwise and lift the dust tank cover.
Fig. 4.
6. Take out the cotton filter and the dust tank filter.
7. Clean the dust tank.
Fig. 5.
Rolling brush cleaning
1. Take out the Rolling brush and clean it.
Fig. 6.
Fig. 7.
2. After cleaning, first place the hexagonal rolling brush head gear into the belt, snap the
hexagonal rolling brush head into the base, and then press the four corner rolling brush
head on the other end into the base to assemble the rolling brush.
3. Finally, install the rolling brush cover in the reverse order.
Fig. 8.
Note
When cleaning the rolling brush, be sure to disconnect the power supply to avoid accidental
start of the roller brush and to avoid damage and injuries.
UV lamp cleaning and installation
1. Turn the device off and unplug it from the power supply.
2. Gently wipe the surface of the UV lamp with a dry cloth.
Note
When cleaning the UV lamp, be sure to disconnect the power supply to avoid electric shock
and injury to humans.
ENGLISH
CONGA POPSTAR 7000 MATTRESS
39