Electrical Wiring Diagram - Beacon Lighting MEGARA Manual De Instrucciones De Instalación

Bayside Megara Fan Installation Instructions
NOTE: AN ADDITIONAL ALL POLE DISCONNECTION SWITCH MUST BE INCLUDED IN THE FIXED
WIRING.
•
Connect "LIVE" supply wire to the "L" of terminal block on the mounting bracket.
•
Connect "NEUTRAL" supply wire to the "N" of terminal block on the mounting bracket.
•
Connect "EARTH" wire to the "
•
Insert the receiver into the mounting bracket and onto the ball joint.
•
Connect the output connector (1) from the receiver to the connector (1) from the fan body.
•
Connect the connector (2) from the fan mounting bracket to the input connector (2) from the receiver.

ELECTRICAL WIRING DIAGRAM

" of terminal block on the mouthing bracket.
Fig. 7