Retention System; Ventilation System - NZI Helmets Spyder III Manual De Usuario

rect sunlight while letting it dry.

RETENTION SYSTEM

This helmet has a retention system that pre-
vents the helmet flying of your head in case of
an accident.
Duble-d rings
Closing:
GB
Fig. 16
Fig. 18
14
O W N E R S
The chin strap has to be guided trough the D-
rings (Fig. 16) and routed back through only
one (Fig. 17-18) until the fitting is tight. You can
avoid the flapping of the chin strap by clicking
it into the button next to the D-rings (Fig. 19).
Opening:
Pull the red release tab to help loosening the
chin strap. Pull it until the chin strap is loose.

VENTILATION SYSTEM

This helmet has several air intakes and inner
ventilation channels that assure a good air ren-
ovation inside. In order to adjust the inner air
flow you can open and close the air intakes as
shown in Fig. 20, 21 and 22.
Fig. 17
Rear air outlet
The rear air outlet allows hot air to flow out of
the helmet providing a good air renovation (Fig.
23).
Fig. 19
M A N U A L