Operating The Device Safely - Waeco PerfectCharge IU1012 Instrucciones De Uso

_910-012PFC.book Seite 19 Mittwoch, 21. Juni 2006 4:12 16
General safety instructions
Electrical cables
Always use sockets which are grounded and secured by
residual current circuit breakers.
If cables have to be fed through metal walls or other walls with
sharp edges, use ducts or tubes to prevent damage.
Do not lay cables which are loose or bent next to electrically
conductive material (metal).
Do not pull on the cables.
Do not lay the 230 V mains cable and the 12 V DC cable in the
same duct!
Fasten the cables securely.
Lay the cables so that they cannot be tripped over or damaged.
2.3

Operating the device safely

Caution!
Note the following basic safety information when using electrical
devices to protect against:
– Electric shock
– Fire hazards
– Injury
Operate the device only if you are certain that the housing and
the cables are undamaged.
Make sure the air inlets and outlets of the device are not cov-
ered.
Ensure good ventilation.
Even after the fuse triggers, parts of the IU0U automatic charger
remain live.
Always disconnect the power supply when working on the de-
vice.
19
All manuals and user guides at all-guides.com
PerfectCharge IU1012