Connecting The Iu0U Automatic Charger - Waeco PerfectCharge IU1012 Instrucciones De Uso

_910-012PFC.book Seite 24 Mittwoch, 21. Juni 2006 4:12 16
PerfectCharge IU1012
7 Connecting the IU0U automatic
charger
Warning!
Avoid coming into contact with the battery fluid.
Caution!
Batteries with a cell short circuit may not be charged as explosive
gases may form due to overheating of the battery.
Warning!
Do not reverse the polarity. Reversing the polarity of the battery
connections will cause a great spark and the fuses will melt.
Connecting the IU0U automatic charger to a battery
➤ Set the main switch (1 1, page 3) to "Off".
➤ Lay the positive cable from the IU0U automatic charger to the positive ter-
minal of the battery and connect it.
➤ Lay the negative cable from the IU0U automatic charger to the negative
terminal of the battery and connect it.
230 V power supply
➤ Using the mains connection cable, connect the device to a 230 V socket
which is protected by a residual current circuit breaker.
All manuals and user guides at all-guides.com

Connecting the IU0U automatic charger

24