Cleaning; Troubleshooting - Klarstein 10029376 Manual Del Usuario

Before using your ice maker, it is strongly recommended to clean it thoroughly.
1. Take out the ice basket.
2. Clean the interior with diluted detergent, warm water and a soft cloth.
3. Then use the water to rinse the inside parts, and drain out the water by unplugging the drain cap on front
bottom side.
4. The outside of the ice maker should be cleaned regularly with a mild detergent solution and warm water.
5. Dry the interior and exterior with a clean soft cloth.
6. When the machine is not to be used for a long time, drain water completely & dry the interior.
PROBLEM
"Add Water" indicator is on.
"Ice Full" indicator is on.
Ice cubes stick together.
Ice making cycle is normal but no
ice formed.
All manuals and user guides at all-guides.com

Cleaning

Troubleshooting

POSSIBLE CAUSE
Lack of Water.
Ice is full in basket.
The ice making cycle is too
long.
Water temperature in inner
tank is too low.
Room temperature or water
temperature in inner tank is
too high.
Refrigerant in cooling system
leaks.
Pipe in the cooling system is
blocked.
SOLUTION:
Stop the ice maker, fill water, and press
"ON/OFF" button again to restart the
unit.
Remove ice from ice basket. Continuous
press "Select" button 5 seconds, the unit
could make ice 10 cycles even "Ice" indi-
cator is on.
Stop the ice maker, and restart it when
the ice blocks melt. Select the small
size ice cube selection.
Replace the water. Temperature of wa-
ter recommended at 8-32
The room temperature should be 10-
43 °C, water temperature should be
8-32 °C.
Verify by a qualified technician.
Verify by a qualified technician.
12