Additional Certifications; Specifications - 3M Speedglas G5-02 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Additional Certifications

1. This product meets the requirements of certain industrial eyewear standards. It does not provide complete
head, eye, and face protection from significant impact and penetration and are not a substitute for good
safety practices and engineering controls. Misuse may result in serious bodily injury or death. For
correct use, consult your supervisor and User Instructions or contact 3M Technical Service in the U.S.A. at
1-800-243-4630. In Canada, call Technical Service at 1-800-267-4414.
2. When exposed to eye and face hazards, wear additional eye and/or face protectors appropriate to the
hazard. ANSI Z87.1 – Occupational and Educational Eye and Face Protection, incorporated by reference in
the OSHA Eye and Face Standard 29 CFR 1910.133, requires safety spectacles or goggles to be worn in
conjunction with the welding helmet if the visor can be raised from the normal position during use. Failure
to do so may result in serious bodily injury or death.
When assembled according to these User Instructions, this welding helmet meets requirements of the ANSI
Z87.1.
Occupational use of this product for eye and face and/or head protection must be in compliance with applicable
health and safety standards. In the US, employers must comply with the OSHA personal protective equipment (PPE)
standard (29 CFR 1910.132) and, as applicable, the eye and face standard (29 CFR 1910.133). In Canada, consult
the applicable standard(s) for your jurisdiction.

Specifications

NOTE: The 3M™ Speedglas™ Welding Helmet G5-02 is not formulated with natural rubber latex.
Table 1. Specifications for 3M™ Speedglas™ Welding Helmet G5-02
Technical Data
Approximate Viewing Area
Approximate Welding Filter
Battery Life
(1 x CR-2450N)
Solar Assist
Welding Helmet Weight (w/
headband and welding filter)
Dark Shades
Light State
Switching Speed
Sensitivity Modes
W WARNING
5.9 x 3 in.
150 x 76mm
1500
No
18.87oz. (535g)
8, 9, 10, 11, 12,
Shade 2.5
0.1 milliseconds at 73F (23C)
6 levels
3

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido