Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING AND MAINTENANCE MANUAL
ELECTRIC CIRCULATOR PUMP SERIES PC & PCB
19
. It is necessary to ground the protection.
The installation of the power cable is very simple. The
power cable used and the external switch must con-
form to the relevant national standards.
If "MOTOR PROTECTION REQUI-
RED" is marked on the pump
junction box. Circuit device must
be installed.
If the pump is used to convey
media at 90°C or higher, the
motor power cable must be a
thermal cable.
www.proindecsa.com / proindecsa@proindecsa.com
.
The maximum permissible diameter of
the power cable is 10 mm.
The power cable must not be in contact
with the piping, pump or motor housing.
And make sure that the type of power
supply is the same as the requirement
on the pump label.
19
Publicidad
