Cleaning Operations - Cimbali S39 Manual Del Usuario

English
For correct application of the HACCP
system, please follow the instructions in this
paragraph.
MILK CIRCUIT AND COFFEE CIRCUIT CLEANING
CYCLES
grease and scaling deposited when the milk is conveyed and
solidify. This will impair the qualitative performance of the
cappuccino maker (1) and of the coffee circuit.
NOTE: the following operations must be carried out when
the machine is on and pressurized.
ATTENTION, RISK OF SCALDING: hot water, steam
and milk residues will spill out when the spouts of the
the hands and all other parts of the body well away until
the cleaning cycle has terminated.
MILK CIRCUIT AND COFFEE CIRCUIT WASHING
CYCLES
The milk circuit and the coffee circuit can undergo several
types of washing cycles:
Daily wash cycle at set hour
Function - The message "EXECUTE WASHING MILK
CIRCUIT" in alternation "EXECUTE WASHING GROUP"
appears on the display at the set hour (consult the "Customer
programming - Service time menu" paragraph).
Activation - Milk circuit: with the modalities described in
"MILK CIRCUIT WASH WITH LIQUID DETERGENT". The
message "MILK WASHING" appears on the display.
Coffee circuit: with the modalities described in "GROUP
WASH WITH DETERGENT TABLET". The message
"GROUP WASHING" appears on the display.
Selection block - milk circuit: 60' function from the hour
set if wash cycle has not taken place, with the "Block milk
circuit" function set (YES).
Coffee circuit: 60' (30' if short washing) from the hour set
if wash cycle has not taken place, with the "Block coffee
circuit" function set (YES).
Wash type - Milk circuit: with water and steam, and with an
external detergent in the place of the milk.
Coffee circuit: with detergent tablet inserted in the
decaffeinated coffee panel (18).
Washings modality
To be performed at the end of the working day or when re-
quested by the machine.
The machine will issue a message on the display "Execute
washing milk circuit" / "Execute washing group" together with
an acoustic signal.
This will be repeated until the operation is performed or until
the end of the timeout.
N.B. Once the wash cycle is underway, it CANNOT be
stopped, even if the machine is switched off.
If the power supply goes off or the machine switches off
during the cycle, when the power returns the message
"Press WASH" will appear on the display screen.
All manuals and user guides at all-guides.com

5. Cleaning operations

49
18
40
To proceed, press the key (26)
requested in the message, and press the key (29)
complete the cleaning cycles.
Programmed wash cycles that are not effected will be memo-
rized by the machine.
- Milk circuit wash with liquid detergent
Milk requires total hygiene.
Therefore, clean thoroughly as indicated.
1) Fill a container with one dose of liquid detergent (see
product instructions).
2) Remove the suction tube (40) from the milk container and
immerse it in the solution; Ensure that the end of the tube
is placed on the bottom of the container.
3) Place the container beneath the machine dispensing
nozzle.
4) Press the key (26) on the touch screen. These options
will appear on the display:
- MILK WASHING;
- GROUP WASHING.
The washing cycle will start if the key (29)
when the cursor is on the milk washing line, or when the
MILK WASHING option is directly pressed on the Touch
Screen.
The message "MILK WASHING" appears on the display.
The washing solution, aspirated and heated, travels through
the milk circuit several times, washing the circuit and inside
the cappuccino maker.
Note: the washing cycle ends when the "MILK WASHING"
message is NO LONGER on the display.
For "cappuccino maker" cleaning instructions and methods,
English
29
26
1
, select the washing cycle
to
is pressed