Hardware Installation; Rear Panel - Zyxel P-335WT Guia De Inicio Rapido

2 Hardware Installation

2.1 Rear Panel

LABEL
USB PRINTER
PORT
LAN 1 ~ 4
WAN
POWER
After you've made the connections, connect the power cable to a power supply and look at the front panel LEDs.
OTIST
RESET
Use a USB cable to connect a USB printer to this port. The Prestige has a built-in print server
that allows a network to share a printer. The Prestige automatically detects the make and model
of the USB printer.
in the User Guide appendix are not compatible
with the Prestige.
Use an Ethernet cable to connect at least one computer for initial Prestige configuration. These
ports are auto-negotiating (can connect at 10 or 100Mbps) and auto-sensing (automatically
adjust to the type of Ethernet cable you use (straight-through or crossover)).
Connect your cable/DSL modem to this port with the cable that came with your modem.
Connect the end of the included power adaptor (use only this adapter) to this power socket.
Use this button to activate OTIST (One-Touch Intelligent Security Technology).
You only need to use this button if you've forgotten the Prestige's password. It returns the
Prestige to the factory defaults (password is 1234, LAN IP address 192.168.1.1. See your User's
Guide for details).
P-335WT
DESCRIPTION
Devices other than the USB printers listed
3