Desktop Computer - Front View - Dell OptiPlex 740 Guía De Referencia Rápida

4 network activity light
5 line-out connector
6 line-in connector
7 USB 2.0 connectors (5)
8 video connector
9 serial connector
Desktop Computer — Front View
11
1 USB 2.0 connectors (2)
All manuals and user guides at all-guides.com
Flashes a yellow light when the computer is transmitting or receiving network
data. A high volume of network traffic may make this light appear to be in a steady
"on" state.
Use the green line-out connector to attach headphones and most speakers with
integrated amplifiers.
On computers with a sound card, use the connector on the card.
Use the line-in connector to attach a record/playback device such as a cassette
player, CD player, or VCR.
On computers with a sound card, use the connector on the card.
Use the back USB connectors for devices that typically remain connected, such as
printers and keyboards.
Plug the cable from your VGA-compatible monitor into the blue connector.
NOTE:
If you purchased an optional graphics card, this connector will be covered by
a cap. Do not remove the cap. Connect your monitor to the connector on the graphics
card.
NOTE:
If you are using a graphics card that supports dual monitors, use the y-cable
that came with your computer.
Connect a serial device, such as a handheld device, to the serial port. The default
designations are COM1 for serial connector 1 and COM2 for serial connector 2.
For more information, see "System Setup" in your online User's Guide.
10 9
Use the front USB connectors for devices that you connect occasionally, such as
joysticks or cameras, or for bootable USB devices see "System Setup" in your
online User's Guide for instructions for more information about booting to a USB
device).
It is recommended that you use the back USB connectors for devices that typically
remain connected, such as printers and keyboards.
1 2 3
8 7 6 5
Quick Reference Guide
4
15