Layout And Function - Festo LOGO! 8 TP EduTrainer Descripción

8 Layout and function

The LOGO! EduTrainer
which is aligned to actual operational reality. The LOGO! has been set up didactically to this end and is
equipped with integrated connection technology for 4 mm laboratory plugs. The LOGO! EduTrainer
programmed with the LOGO! control unit or a PC with LOGO!Soft Comfort programming software.
The LOGO! EduTrainer
basic and special control technology functions, LOGO! replaces a variety of conventional switchgear and
control devices.
Which advantages does control with LOGO! offer?
– LOGO! is a mini control system. It's especially well suited as a quick, uncomplicated and inexpensive
introduction to logic signal processing.
– Learning content included with training packages TP 201 and TP 601 is expanded with LOGO!.
– The first step involves controlling processes with a relay controller.
– Processes are then controlled with the LOGO! mini control system.
You learn how to program and connect PLCs, and find out about their advantages with a manageable
scope of training work.
– The LOGO! control program can be entered directly to the control unit or created conveniently at a PC
with LOGO!Soft Comfort programming software. LOGO!Soft Comfort sample solutions for the processes
covered by TP 201 and TP 601 can be found on the included CD-ROM.
– The LOGO! mini control system provides you with a compact training device with integrated connection
technology for 4 mm safety plugs. Components included in the training packages from Festo Didactic
can thus be directly connected.
28
®
training package is a universal mini control system for basic and further training
®
TP can be used in order to implement simple automation projects. With its extensive
®
TP is
© Festo Didactic 8049519