Technical Specifications - Hudora XXL 305 Instrucciones De Montaje Y De Uso

INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral compo-
nent of the product. Therefore, please store them and the packaging carefully in
case questions arise in the future. Please always include these instructions when
handing on the product to a third party. This product must be assembled by an
adult. This product is designed for private / domestic use only. This product is not
designed for commercial / industrial use. The use of the product requires certain
capabilities and skills. Always adjust according to the age of the user and use for
the purpose it has been designed for.

TECHNICAL SPECIFICATIONS:

Item: Stand Basketball set XXL 305
Item number: 71661
Height-adjustable: 260 – 305 cm
Purpose: Portable training rack for basketball throwing exercises.
If you have assembly problems or would like further information on the product, we
have all you need and more at http://www.hudora.de/.
CONTENTS
1 x Basketball stand (cf. parts list on page 2) | 1 x These instructions
Other items included are meant to facilitate safe transportation and are not required
for the installation and use of the product.
GENERAL TRAINING PRINCIPLES
1. Warming Up:
Warm up before each exercise routine. Walk or run in place, stretch or light ca-
listhenics as a warm-up before using the home trainer.
2. Respiration:
The correct respiration plays an important roll in training. Breathe quietly and uni-
formly. Never stop breathing during training.
3. Clothing and Place:
Dress in comfortable clothing during training and see that you have a sufficient
place for the execution of the exercises. Always wear sport shoes, do not train with
bare feet, sandals, or stockings.
4. Cooling down:
Cool yourself down after the training with easy stretching or calisthenics. This way
your heart rate can slowly decrease and the body can regenerate more quickly for
the next exercise routine because the metabolic waste (Lactate) can be more effi-
ciently disposed of with slow cool downs.
5. Health:
Quit your exercise immediately if you notice a pulling in the muscles or general pain
as you practice. Contact a physician for your safety.
USE: Ensure that the equipment is in a firm and stable position. Adapt the training
time to your performance capabilities, and do not over-tax yourself.
WARNING: As a matter of course, you should consult your doctor before starting
to train.
SAFETY INSTRUCTIONS
• Place the basketball stand on a firm and level surface and make sure this piece
of equipment is positioned securely and firmly.
• Check that all connections have been tightly fastened before using the basket-
ball stand and check again later!
• Always fill the base with water or sand so that the stability of the basketball
stand is assured and it won't fall forwards. We would recommend filling the base
with sand rather than water as water will flow out if there is a hole. This could
cause the product to fall over and cause damage to objects or injury to people.
• This training equipment is NOT a toy!
• Never allow children to play in the immediate proximity of this piece of training
equipment without supervision and never let them assemble it.
• Never use the basketball stand near water or leave it outside in the rain.
• Wear suitable clothing when training. The clothes must be constituted in such a
way that they cannot catch in anything during the training due to their fit.
• Always wear training shoes, and never train in bare feet, or when wearing san-
dals, socks or stockings.
• Never wear jewellery which could catch in the basketball basket.
• Do not climb up the basketball stand.
• Do not hang off the basket or make slam dunks, the basketball stand could tip
over.
• If you start to feel unwell, discontinue training immediately.
• When permanently irradiated with UV light, the material ages significantly fa-
ster. To avoid premature aging and thereby extend the service life, you should
always store the product in a dry and dark place when not in use. Do not perma-
nently expose the product to wind, moisture, extreme temperatures or sunlight.
All images are examples of the design.
TOOLS REQUIRED
• 13 mm Allen key
• Hammer (not supplied)
• Spirit level (not supplied)
INSTRUCTIONS ON ASSEMBLY
Step 1:
Attach the rollers and the lower bar no. 8 with the axle bolt no. 10 to water base.
Position this as shown in the diagram. (Diagram 1)
Step 2:
Attach the lower left and right struts (no.12 & 13) to the lower bar no. 8 by screw no.
16, attach also the left and right struts to the water base by screws no. 18. (Diagram 2)
Step 3:
Now fill the base with water or sand, close base at top side by plug no. 14 after filling
base with water or sand. (Diagram 3)
Step 4:
Attach the basket to backboard and the upper bar by 4 screws no. 15. Attach the upper
struts (no. 4, 5) to the upper bar (no. 6) and the backboard by screws no. 19 and no.
17. (Diagram 4)
Step 5:
Attach the net to the ring. (Diagram 5)
Step 6:
Insert the upper bar (complete with backboard and basket ) (no. 6) at least 11 cm into
the middle bar (no. 7) by two screws no. 20. Prior to fixing, you need to choice the
desired height for playing. (Diagram 6)
Step 7:
Attach middle bar (completed with upper bar and backboard and rim) (no. 7) to lower
bar (no. 8) by screw no. 20. At this stage, better have a helper to hold the middle bar.
(Diagram 7)
Transport:
When the base filled with water or sand, it's quite heavy as the whole set will be
around 130 kgs. For moving, you need to have a helper to tip the base from end onto
the rollers, and then pull or push to the required location. We height recommend you
position the product at the desired place before filling with water. Too often moving
may cause damage on the base or metal frame due to the heavy weight.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and after
each use. Do not make any structural changes. For your own safety, please use
original spare parts only. These can be sourced from HUDORA. If parts become
damaged or if sharp edges or corners should develop, the product may not be used
any more. If in any doubt, please contact our service team (http://www.hudora.
de/). Store the product in a safe place where it is protected from the elements,
cannot be damaged, and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection
point provided in your area. Local waste management companies will be able to
answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. Therefore, you can find numerous
information on the product, replacement parts, solutions to problems and lost as-
sembly manuals at http://www.hudora.de/.
6/16