Child Safety Lock - universalblue UCPC9901-20 Manual De Instrucciones

• DECREASE : to select the hours when the device should
remain switched on.
Let's imagine we want to program the device to turn on from 9:00 to
12:00. In this case we will have to use the DOWN button to set the
time among 00:00 and 9:00. Then we will press UP button until 12:00
indicating that the device should be switched on at those hours.
Finally, we press the DOWN button until 23:00.

CHILD SAFETY LOCK

Press temperatura button on the display for a few seconds
until the lock symbol appears on the display. Once activated,
the device will not respond to any command. To unlock the device,
press the TEMPERATURE button again.
To activate / deactivate this function from the remote control, press
the lock button .
TEMPERATURE
Room's temperature is shown on the display every time the unit is
switched on.
Temperature can be set when the device is in standby mode or
when it is in operation.
Temperature is regulated automatically. When the temperature in
the room reaches the set level, the unit will stop. When the
temperature in the room differs by 2º from the set temperature, the
appliance will start up again.
Note: There may be a 4º variation between the temperature shown
on the display and the actual room temperature.
32