Opis 60S mobile Manual De Uso página 9

*02#<1-9>#<phone
number>*
*03#<1-9>*
*04#<0-1>#<PIN>*
*05#<0-1>*
*06#<1-9>*
*07#<destination no>*
*001*
*002#<destination no>* *002#01234567*
*003#<nnn>*
*00#<0-3>#<PIN>*
*08*
*<1-9>
Receiver Tones
You will hear one of 3 possible tones when you pick up the receiver. The following
table explains their meaning.
Type Signal
Silence None
Dial-tone Continuous toot The phone is ready to accept any dial input.
Busy Toot-toot-toot
*02#4#0123456789* Enter/Change a quick-dial number
*03#2*
*04#0#1234*
*05#0*
*06#5*
*07#01234567*
*001*
*003#005*
*00#1#1234*
*08*
*5
Meaning
Phone is not switched on (Note: you have to wait for
5 seconds after switching on the phone till a tone is
generated)
The phone is not ready to make a call. Check the lights
in the bottom of the phone and refer to section Status
lights for more details.
9
Change connection delay
Disable/Enable PIN-lock
Disable/Enable Roaming-Lock
Change loudspeaker volume
Send IMEI and net code to smart-
phone
Send log to Opis Technology
Forward texts to number
Configure service operator settings
Enable/disable special mode
Reset to factory defaults
Use quick dial