Korona 81503 Manuel D'iNstructions página 23

Control Panel / Remote Control Settings
c
b
a
a. On/Off button
- Turns the fan On/Off
b. Speed Button
- Allows 3 different speed level selections.
Low – Medium - High
c. Swing button
- Turns oscillation on / off
d. Cool/Anion button
Control panel
- Press once to start the cooling function, ice packs must be added
- Press twice to start the anion function (air cleaning function)
- Press three times, cooling and anion function will be activated
- Press four times, function will be shut off.
Remote Control
- Cooling and Anion function are two separate function keys.
By each press the respective symbol is shown on the display.
Warning: Always make sure that there is enough water in the water tank, before pressing the cool/
anion key. Do not activate this function with an empty water. This might damage the appliance.
e. Timer button
- Allows for automatic shut off. Time increases by one hour with each push of the button, up to 12 hours.
f. Mode button
- Allows for up to 3 wind modes.
Normal: The fan runs according to the set speed setting (Low – Medium - High)
Natural: The fan runs according to a pre-determined program which varies according to which speed is
selected. This setting will enable you to enjoy a nice, natural breeze.
Sleep: The fan runs according to a pre-determined program; the fan will gradually slow down and remain at
low setting. We recommend to choose the low speed setting.
Before first use of the remote control, remove the protective sheet from the button cell.
Instruction Manual
a
d
f
e
d
f
ENGLISH
12
b
c
e
23