Draining out the water
Always use the drain hole which at the bottom of the fan.
Do not over tilt the fan when draining out the water so that to avoid from water leakage from the water tank
entrance.
Using the ice pack
The ice packs should be used if you wish to increase the cooling effect of the fan.
-
Completey remove the cover of the water tank and place the ice packs into the water tank. Make sure
that water is added, reaching the max. level.
-
Reinsert the cover of the water tank and close it.
We recommend to only use two ice packs at a time.
Before the ice packs can be used they need to be filled with water and placed into the
freezer until the water is frozen. Never fill in any other liquids or chemicals into the ice packs.
Operation
The fan can be used as a fan, humidifier, air cooler and air purifier by using the anion function.
Always ensure that the fan is unplugged from the power supply and turned off before
commencing with the assembly process.
Make sure that the fan is properly assembled before operation.
The appliance can be operated via the control panel as well as by remote control.
1. Place your fan on an even, dry and stable surface and plug it into a proper power socket.
Make sure your local voltage matches the technical data of the appliance. Otherwise the appliance
may overheat and get damaged.
Adhere to a safety distance to walls and other objects.
26