Tips for safety:
• Place the appliance in the immediate vicinity of
an electrical power socket. Do not use an exten-
sion cable. Ensure that the appliance and the po-
wer socket are easily and quickly accessible in
the event of an emergency.
• Never overburden the appliance. The paper
shredder is designed for brief operating
periods.
• In cases of danger, immediately remove the elec-
trical plug from the socket.
• NEVER use the shredder for tasks for which it
was not designed.
• Always be attentive! Always pay attention to
what you are doing and act with common
sense. Never use the appliance when you are
distracted or don't feel well.
Technical data
Voltage:
220-240 V ~ 50Hz
Rated current:
1,5 A
Protection class:
II
Cutting process for
Paper:
Crosscut, 4 x 23mm particles
Working width:
223 mm
CO time:
3 Minutes
CO Time
The C.O. Time (Continuous Operation) details how
long an appliance may be used without the motor
overheating and being damaged. After the appliance
has run for for this period it must be switched off until
the motor has cooled itself down.
Items supplied
Shredder KH 4405
Operating Instructions
Appliance description
q
Cutter attachment
w
Switch
e
Cutter opening for CD/Credit cards
r
Cutter opening for paper
t
Large waste receptacle (Paper)
y
Power cable
u
Small waste receptacle (transparent) /
Viewing window
Commissioning
• First of all, place the cutter attachment
the large waste receptacle
y
cable
is located at the rear, i.e. on the closed
side.
• Slide the small waste receptacle
in the opening on the front side of the large wa-
ste receptacle
t
• Connect the paper shredder to a power socket.
Operation
Switching the appliance on:
• Place the switch
shredding.
Inserting paper:
• Insert paper from above and in portrait format
into the cutter opening for paper
The motor starts automatically and switches itself off
automatically if no further paper is inserted. You
can shred up to 5 sheets (80g/m
same time.
- 15 -
q
t
so that the power
u
for plastics
.
w
to the position
for
r
.
paper) at the
2
onto