Motorola WAVE TLK 100i Guia Del Usuario página 41

Chapter 14
Emergency Operations
There are two ways in declaring or canceling an Emergency.
You can declare or cancel an Emergency locally by pressing the programmable button (Emergency
button) or the Emergency button on your Bluetooth accessory.
You can also declare or cancel an Emergency remotely by an authorized user through WAVE APP or a
dispatcher.
When Emergency is declared and radio enters into Emergency mode successfully, the display flashes
with the Emergency icon. When the display flashes the Emergency icon, you are only allowed to view
the battery status, volume control, make an emergency call and exit the emergency mode.
During the Emergency mode, any call launched is declared as Emergency Call.
14.1
Declaring Emergency
Prerequisites: Configure the Menu/Programmable button to Emergency. Contact your dealer for
more information.
Procedure:
• Press and hold the Menu/Programmable button.
The display shows a countdown from !! 3 !!, !! 2 !!, and !! 1 !! with increasing tone.
If Emergency is declared by mistake, during the countdown, release the Menu/Programmable button
to cancel declaring Emergency.
If Emergency is declared successfully, your radio shows the following indications:
• The Emergency tone sounds.
• The amber LED lights up.
• The display shows Emergency icon.
If Emergency is failed to declare, your radio returns to the previously selected channel.
14.2
Cancelling Emergency
Prerequisites: Configure the Menu/Programmable button to Emergency. Contact your dealer for
more information.
Procedure:
• Press and hold the Menu/Programmable button.
The display shows a countdown from !! 3 !!, !! 2 !!, and !! 1 !! with increasing tone.
If Emergency is cancelled by mistake, during the countdown, release the Menu/Programmable button
to return to the Emergency mode.
If Emergency is cancelled successfully, the display returns to previously selected channel.
MN005652A01-AK
Emergency Operations
41