Preparing The Cabinet - Faber FLEXA FLEX24SS300 Instrucciones De Instalación

PREPARING THE CABINET

The Hood can be installed directly on the u
1
ATTACHING THE HOOD TO THE CABINET
The Hood can be installed directly on the underside of the cabinet.
1
If the cabinet bottom is recessed, wood blocks need to be installed
2
to insure proper alignment with the cabinet bottom.
Wood blocks should be flush or recessed 1/16" to 1/8" within the
cabinet bottom as shown.
Create a cut out in the bottom of the cabinet as shown in the
3
illustration.
SNAP-ON FITTING
wood filter strips
RANGE HOOD 24"
RANGE HOOD 24"
RANGE HOOD 24"
13