Rear Panel - Fender THIRTY & FIFTEEN G-DEC 3 Instrucciones De Funcionamiento

Rear Panel

Q. POWER — Switches the G-DEC 3 on-off.
R. POWER CORD SOCKET — Connect your G-DEC 3 to a grounded
A/C outlet in accordance with the voltage and frequency ratings
specified on the rear panel of your G-DEC 3.
S. FUSE — Protects the G-DEC 3 from electrical faults. Replace a
blown fuse only with the type and rating specified below the
fuse holder. To remove the fuse: Unplug the G-DEC 3 power
cord from the socket to expose the fuse holder. Use a small
screwdriver to pry out the fuse holder using the notch on top.
Replace the fuse and reinstall the fuse holder.
T. LINE OUT (G-DEC 3 THIRTY ONLY) — These line level stereo
outputs are suitable for connection to recording or sound
reinforcement equipment. Use balanced (TRS) cables for the
best performance.
Play Mode — getting started
Play mode is where you'll spend most of your time playing
guitar. As a matter of fact, you could spend days exploring
Play mode and never leave—because Play mode is where
all the Presets are!
Plug in and try it! Turn up your guitar and play the first
Preset. The Preset name is shown highlighted on the first
line of the screen.
Press the START-STOP button to start the Band playing. The
Band track title is shown near the bottom of the screen.
Not inspired? Turn the big ENCODER knob and select another
preset, and then another...you have dozens more to go!
When you're ready to move beyond the world of Presets
and Play mode, press one of the soft keys below the screen
to enter the other modes.
Press EXIT to return to Play mode at any time.
To learn more about the awesome potential of your G-DEC 3,
please turn the page.
U. FOOTSWITCH — Connect the (optional) 4-button footswitch
(p/n 0994070000) here for remote functions (see page 8).
V. AUX IN — You can connect the headphone output on your CD
or MP3 player here using a mini-stereo cable. This is a quick way
to play music through your G-DEC 3 for accompaniment or to
learn songs. Use the volume control on your player together
with BAND LEVEL {L} to adjust the auxiliary volume level.
W. GUITAR — You can use this input to let a friend or instructor
plug in with you.
NOTE: This is a lower sensitivity input which makes it ideal for
guitars with hot (high-output) pickups. If your guitar distorts too
easily using the front panel INPUT {A}, try plugging into the rear
panel GUITAR input.
PRESET NAME
������
����
����� ���
������
��������
�����
BAND TRACK
f e n d e r . c o m
���
����
��������
����
����
ENCODER KNOB
5