Initial Configuration - golmar 6502/G+ Guía Rápida

Ocultar thumbs Ver también para 6502/G+:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

6502/G+

5. INITIAL CONFIGURATION

- One of the panels of the installation is in charge to manage the system, thus it is not necessary to assign IP addresses or to config the
changes applied to each one of the devices of the installation.
To configure a panel as system manager, follow the steps:
1
Marcar el número de vivienda
o pulsar
para mostrar la agenda
Access to configuration.
5
Introducir longitud del código de llamada (5 o 6 dígitos)
Select 5 digits dialling length.
*6 digits dialling code length in the
case you like to indicate the floor
In systems with general entry panels, will require to follow the same process described before, but in step 6, the number of building
should be 99. The number of entry panel will run from 1 to 19 (max. number of general entry panel is 19).
It follows the explanations on how to review the registered configuration.
1
Marcar el número de vivienda
o pulsar
para mostrar la agenda
Access to configuration.
(*) Check the quick guide of the monitor to know the monitor's configuration, in order to communicate with the panel.
(**) When the panel is in idle state, it will be necessary to push any button to wake it up.
5
2
Introducir contraseña
Type the installer PIN code
"2718" with the keypad and press validation
6
Introducir número de edi cio (1 a 99)
Type "1" for building number and
press validation icon.
2
Introducir contraseña
Type the installer PIN code
2718 with the keypad and press validate.
Edi cio
Placa
Dirección IP
Máscara de red
Puerta de enlace
Dirección Mac
3
Menú de ajustes
Select the second option in
settings menu (1/3).
7
Introducir número de placa (1 a 19)
Type "1" for panel number and
press validation icon.
3
Menú de ajustes
Press the right arrow button to
go to settings menu (3/3).
IP G+
4
Ajustes de la placa
Select second option in settings
menu (1/2).
8
Registro correcto. El sistema se reiniciará ahora
At that moment, the panel will reboot
and will be set as system manager.
4
Menú de ajustes (3/3)
Select the fourth option.
Block and door panel
number set.
www.golmar.es

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

12327402

Tabla de contenido