5.
Press down the stopper pole while pressing the
feed button until it contacts the stopper screw.
1
3
2
Fig.35
► 1. Stopper pole 2. Stopper screw 3. Feed button
6.
Slide the depth pointer so that the pointer indi-
cates "0" on the scale.
Fig.36
► 1. Depth pointer
7.
Adjust the cutting depth by pulling up the stopper
pole while pressing the feed button.
1
2
Fig.37
► 1. Stopper pole 2. Feed button
8.
To perform fine adjustment of the cutting depth,
turn the dial on the stopper pole so that it indicates "0".
1
Fig.38
► 1. Dial
9.
Turn the head of the stopper pole to obtain the
desired depth. To increase the depth, turn the head
counterclockwise. To decrease the depth, turn the head
clockwise. (The depth changes by 1 mm (3/64") per one
revolution.)
1
1
Fig.39
► 1. Head of the stopper pole
10. Tighten the stopper pole fixing nut.
1
Fig.40
► 1. Fixing nut
14 ENGLISH