Ria910 Accessory Assembly Instructions; Assembly Instructions For Slings; Instructions For Use - Mopedia RI900 Manual De Instrucciones

8.2 RIA910 accessory Assembly instructions

Note: for optimal use of the RIA910 lifting arm accessory, it is advisable to remove the RI900
lifting half-arms (ref. 1) by unscrewing the special tightening handwheels and pulling out
the half-arms themselves; this will allow a better management of the lifted person by the
operators, both for the operations to be performed on him and for his handling.

8.3 Assembly instructions for slings

The RIA200 and RIA210 harnesses are equipped with 6 attachment points (3 on each side)
with adjustable heights through different eyelets corresponding to the different positions of
the person's position.
Attach slings points 1 and 2 to hooks A
Attach slings points 3 to the hooks B
Images for illustrative purpose

9. INSTRUCTIONS FOR USE

WARNING!
ON FIRST USE IT IS RECOMMENDED TO CHARGE THE BATTERIES FOR ABOUT 6/8
HOURS. CONSEQUENTLY MAKE SURE THAT THE BATTERY IS CHARGED BEFORE
EACH USE.
1. Open the packing carton and check that
the contents correspond to what indicated
in the manual and that the parts have not been
damaged during transport. In case otherwise,
contact your dealer immediately.
2. Remove the hole caps on the appropriate holes
in the central column and install the plate on it
(ref. f) using the appropriate screws (ref. e)
3. Assemble the lifting arm (ref. a, b, c)
4. Mount the lift arm on the special housing in the
plate e tighten using the clamping handle (ref. g)
The accessory is ready for use.
Image for illustrative purpose
7